Somebody’s feral aunt direct to film transfer + pocket

Direct-to-Film (DTF) Transfers are full-color heat applied transfers for light and dark garments. No weeding or masking is required and DTF transfers can be applied to cotton, cotton/poly blends, and even 100% polyester.

Description:

       Direct to Film Transfer

Size:  10.5" on longest side

Color: Full

How to Press Direct to Film Transfers:

1. Press garment for 15 seconds with a heat press at a temperature of 300-310 degrees, this removes any moisture to ensure proper adhesion of the DTF.

2. Place the transfer, white side down, onto the garment. The colored design should be facing up.

3. With a heavy pressure, press the garment with the design in place, and the heat press at 300-310 degrees, press for 10 seconds. press twice.

4. Remove the garment from the heat press, and let it cool completely until cool to the touch.

5. Once cooled, slowly peel off the plastic backing.

6. Place the plastic backing back onto the DTF image that is now adhered onto the garment and press again for 10 seconds. 

Notes:

-Do not use butcher/teflon or any other paper to cover this transfer when pressing

- Colors will vary slightly compared to this image mockup. slight color change may occur after pressing. We do NOT accept any returns or exchanges for any of our products, due to the unique type of product. 

-If you notice a smudge, scrap, OR irregularity you MUST contact us with in 24 hours of shipment arrival. If you choose to press the Transfer(s) we will NOT offer any refund or replacement as you have used the product for what it was intended.

We are NOT responsible for any transfers that are PRESSED incorrectly and make sure you are following pressing instructions